496256 Issue 1
25
8.
Key in the zone name as described at the beginning
of this subsection (see Figure 2).
9.
Press Enter when you have completed the zone name.
The system saves the new name and moves the
cursor back to the zone number, for example:
Z03:NAME =
LOUNGE
10. Repeat steps 6 to 9 for all the other zones you
want to name.
11. Press Menu three times to stop.
Using the Log (Menu 9)
The system keeps a log of up to 500 events. You can examine this log from
the keypad. If you have a printer attached to your system you can also print
the log. To use the log:
1.
Key in your access code.
2.
Press
Menu
followed by
9
.
The display shows:
9: LOG FUNCTIONS
3.
Press Enter.
The display shows:
VIEW EVENT LOG ?
EITHER:
4.
Press Enter to examine the log from the keypad display.
The display shows (for example):
15:28 26/03/96
U01:A04: UNSET
The first line of the display shows the time and date of the recorded
event. The second line of the display shows the user on the left, fol-
lowed by a zone- area- or level number in the middle, followed by the
operation performed on the right.
5.
Press A to see earlier events, or B to see later events.
6.
Press Menu when you have finished examining the log.
The display shows:
VIEW EVENT LOG ?
OR (if you have a printer attached to the system)
7.
Press A followed by Enter to print the log.
The system starts printing the log and the
display shows:
PRINTING LOG
When log is finished printing the display
shows:
PRINT EVENT LOG ?
4. Special Functions
