496256 Issue 1
5
Level
A collection of one or more Areas that are all set together
by one of the Level keys (A, B, C and D).
Omit
To bypass a zone that will normally start an alarm when
triggered.
Panic Alarm
An alarm button used to raise an alarm in the event of a
personal attack. The system can be programmed to let
you raise a panic alarm by pressing 1 and 3 together on
the keypad. A Panic Alarm zone is also a 24 hour zone.
Partition
A Partition is a part of your alarm system that behaves
like an independent unit. A Partition can have its own
access codes; can be set, unset and reset independently
of the rest of the system. The 8136 can provide up to four
Partitions.
Reset
The act of getting the system ready so that it can be set
again, after you have switched off the bells by disarming
the system.
Set
The system will raise an alarm if one or more zones are
triggered.
Silent Set
The system sets without giving any exit tone from the
keypads.
Unset
The system will not raise an alarm if a zone is triggered.
However, see 24 hour zones.
Zone
The spaces the system treats as detection points.
Zone name
A 16 character name that you can program into the
system. When the system starts an alarm it will display
the zone name on the keypad.
1. Introduction
