sauter SlabMatrix Basic 1.0, User Manual

Page: 48 / 88

Routing and drilling device
48
Figure 23: Components SlabMatrix Pro 1.0 __________________________________________ 63
Figure 24: Fastening the longitudinal rails ___________________________________________ 64
Figure 25: Longitudinal rail with support mounted on the hole matrix board ________________ 65
Figure 26: Cross rail frame connected to the longitudinal rails ___________________________ 65
Figure 29: Fixing a wooden board to the work plate (as an example) _____________________ 67
Figure 30: Fastening a wooden board to the hole matrix board __________________________ 68
Figure 32: Principle of conventional milling __________________________________________ 71
Figure 33: Direction of milling for outer and inner edges _______________________________ 71
Figure 33: Flattening ____________________________________________________________ 72
Figure 34: Machining step 2 ______________________________________________________ 72
Figure 35: router bit for flattening _________________________________________________ 72
Figure 36: Machining the left edge of the board ______________________________________ 73
Figure 38: Grooving _____________________________________________________________ 74
Figure 41: Machining stair stringers ________________________________________________ 75
Figure 42: Milling tool, also suitable for cut-outs ______________________________________ 76
Figure 43: Machined cut-out ______________________________________________________ 76
Figure 44: Adapter plate type OF 100 fixed on the sole of the Duodübler __________________ 77
Figure 45: Positioning of the adapter plate on the base plate ____________________________ 77
Figure 46: „Duodübler“, mounted __________________________________________________ 77
Figure 47: Row of holes, e.g., for shelf holders _______________________________________ 78
Figure 48: Set of longitudinal rails for extending the Y-axis _____________________________ 79
Figure 49: Routing and milling device with extended Y-axis _____________________________ 79
Figure 50: Adapter plate Laser ____________________________________________________ 80
Figure 51: Mounting frame with adapter plate laser ___________________________________ 80
Figure 53: End stop of the cross rail is set ___________________________________________ 80
Figure 54: Laser unit sideways ____________________________________________________ 81
Figure 56: Wall bracket __________________________________________________________ 82
Figure 57: Clamping and stop set Basic _____________________________________________ 82
Figure 58: Clamping and stop set Pro _______________________________________________ 82
Figure 59: Hose bar _____________________________________________________________ 83
Figure 60: Brush kit _____________________________________________________________ 83
List of tables
Table 1: Scope of delivery SlabMatrix Basic 1.0 _______________________________________ 53
Table 2: Technical data SlabMatrix Basic 1.0 _________________________________________ 54
Table 3: Usable routers with the adapter plate OF 55 __________________________________ 54
Table 4: Usable routers with the adapter plate OF 100 _________________________________ 55
Table 5: Scope of delivery SlabMatrix Pro 1.0 ________________________________________ 63
Table 6: Technical data SlabMatrix Pro 1.0 __________________________________________ 64