sauter SlabMatrix Basic 1.0, User Manual

Page: 64 / 88

Routing and drilling device
64
10 4 Mounting brackets for fixing the routing and drilling device on
the hole matrix board
11 2 Locking device of the cross rails (X-axis)
12 2 Locking device of the longitudinal rails (Y-axis)
13 1 Allen key
14 4 End stops for infinitely variable limitation of the movements in
the X- and Y- axes
Table 12: Technical data SlabMatrix Pro 1.0
designation dimensions
Machining length(Y-axis), max. 940 mm
Machining width (X-axis), max. 880 mm
Height adjustment range (Z-axis) in 13 steps 120 mm
Hole matrix for the Y- und X-Axis 32 mm
Height adjustment step of the mounting frame 10 mm
Set of longitudinal rails for extending the Y-axis
(Art. Nr. SA-SM-EXT-KIT)
940 + 1330 mm
20.2 Usable routers
Either the OF 55 adapter plate or the OF 100 adapter plate is also used to mount the router in the
SlabMatrix Pro 1.0 routing and drilling device.
Table 3 and Table 4 in chapter 6.2 list the routers that can be used.
20.3 Assembly of the SlabMatrix Pro 1.0
To mount the routing and drilling device SlabMatrix Pro 1.0 on a work top, proceed as described in
chapter 6.3. Use the clamping brackets to mount the longitudinal rails.
Figure 84: Fastening the longitudinal rails