sauter SlabMatrix Basic 1.0, User Manual

Page: 77 / 88

Routing and drilling device
77
Figure 104: Adapter plate type OF 100 fixed on
the sole of the Duodübler
The drilling pattern on the adapter plate is
marked with the letter I (see Table 4).
The fastening is done with 4 screws M
6x20, washers and nuts.
Figure 105: Positioning of the adapter plate on
the base plate
To mount the Duodübler in the mounting
frame, it is important to align the two spin-
dles of the Duodübler either parallel to the
X-axis or the Y-axis. For this purpose, cor-
responding markings are provided on the
adapter plate and on the base plate. The
adapter plate must then be aligned with the
corresponding orientation and the adapter
plate has finally to be clamped.
Figure 106: „ Duodübler “ , mounted
For machining, please also observe the in-
structions in the operating manual of the
Duodübler.