sauter SlabMatrix Basic 1.0, User Manual

Page: 78 / 88

Routing and drilling device
78
Figure 107: Row of holes, e.g., for shelf holders
The 32 mm hole distance of the milling and
drilling device is identical to the spindle
spacing of the Duodübler.
The workpiece is fixed for machining at a
distance (downwards) from the hole matrix
board (here with non-slip supports).
In addition to the row of holes in the Y-di-
rection, rows of holes in the X-direction are
also possible.
For further machining options, please refer
to the operating instructions of the Duo-
dübler.
24 Options for the routing and drilling device
The following options are available for the routing and drilling device:
• Extension set for SlabMatrix Pro 1.0: longitudinal rails for extending the Y-axis, also with hole
matrix board (Art. No. SA-SM-EXT-KIT).
• Adapter plate for the laser (Art. No. SA-SM-LASER)
• Laser unit sideways (Art. No. SA-SM-LASER-SIDE)
• Wall mount (Art. No. SA-SM-RACK)
• Hole matrix boards with the dimensions of 1200 x 800 mm
• Clamping and stop set for SlabMatrix Basic 1.0 (Art. No. SA-SM-FIX-KIT-BASIC)
• Clamping and stop set for SlabMatrix Pro 1.0 (Art. No. SA-SM-FIX-KIT-PRO)
• Stop bolt (Art. No. SA-SM-PIN)
• Hose bar (Art. Nr. SA-SM-HOSE-BAR)
•
Brush kit (Art. Nr. SA-SM-BRUSH-KIT)