sauter SlabMatrix Basic 1.0, User Manual

Page: 57 / 88

Routing and drilling device
57
2. Step:
Assembling the longitudinal rails with the mounting frame assembly and cross rails
Figure 68: Connecting the fastening bracket to the
longitudinal rail
Screw the fixing brackets onto the end
faces of the longitudinal rails. Use the en-
closed half-round head screws.
Figure 69: Longitudinal rails with the pre-assembled
supports
Position the longitudinal rails parallel to each
other at a distance between 500 and 1000
mm, if necessary, adapted to the workpiece
width to be processed.
Clamp the beams onto the longitudinal rails
(both at the same distance from the front).
Figure 70: Mounting frame and cross rails con-
nected to the longitudinal rails
Position the mounting frame with the cross
rails centrally on the supports of the longi-
tudinal rails.