sauter SlabMatrix Basic 1.0, User Manual

Page: 83 / 88

Routing and drilling device
83
24.6 Hose bar (Art. Nr. SA-SM-HOSE-BAR)
Figure 119: Hose bar
This simplifies the tracking of the hose during
machining.
24.7 Brush kit (Art. Nr. SA-SM-BRUSH-KIT)
Figure 120: Brush kit
25 Service and maintenance
The routing and drilling device is designed to be very easy to maintain. The good sliding properties
of the rails can be supported by the occasional but sparing use of lubricants, e.g., silicone spray, etc.
Keep the longitudinal and cross rails free from dust and chip accumulation.
The ease of movement of the indexing pins can be maintained with a thin-bodied oil.
As a rule, keep your workplace clean. Wood debris can be a trip hazard.
If, despite careful manufacturing and testing procedures, the routing and drilling device ever exhib-
its malfunctions, the repair work should be carried out by sauter GmbH .
26 Environment
The routing and drilling device, accessories and packaging should be handed in for environmentally
friendly recycling.
27 Warranty
For the routing and drilling device SlabMatrix Basic 1.0 or SlabMatrix Pro 1.0 of sauter GmbH , the
statutory warranty applies from the time of delivery for all design, material, or manufacturing de-
fects. Parts subject to wear and tear as well as damage caused by improper handling, non-compli-
ance with service instructions, intervention by third parties and force majeure are excluded from the
warranty.