Chapter 5
Configuring
the EM13X Series
General Meter Setup
EM13x Series SMART MULTIFUNCTION METER
89
Generating Energy Pulses through Relay Outputs
To generate energy pulses through a relay output:
Set a relay to either pulse, or KYZ mode, and then select a polarity
(active pulse edge) for energy pulses and a pulse width.
Select a source energy accumulator and the pulse rate for your output
Send your new setup to the meter
Configuring Analog Outputs
The meter can be ordered with four optional analog outputs with
options for 0-1mA, ±1mA, 0-20mA and 4-20mA current outputs.
Using PAS
Select
General Setup
from the
Meter Setup
menu, and then click on
the
Analog Outputs
tab.
Figure
5-10: General Setup Dialog Box – Analog Outputs Tab
