Chapter 7
Monitoring
Meters
Viewing Real-time Data
EM13x Series SMART MULTIFUNCTION METER
123
Organizing Data Sets
PAS supports 33 programmable data sets with up to 40 data
parameters. Set #0 is intended for simple meters, which have a limited
number of parameters, and is not recommended for the use with the
EM13X Series. To re-organize data sets, select
RT Data Sets
from the
Monitor
menu or click on the button
on the local toolbar.
Some data sets are preset for your convenience and others are empty.
You can freely modify data sets.
See Appendix D for a list of data available in your meter.
Polling Options
To change the polling options, click on the Data Monitor window with
the right mouse button and select Options.
If you check
Do not stop on errors
, polling is resumed automatically
when a communication error occurs, otherwise polling stops until you
restart it manually.
Viewing a Data Table
Changing the Data View
PAS displays data in either a single record or multi-record view. To
change the view, click on the
Data Monitor
window with the right
mouse button and select either
Wrap
to see a single record, or
UnWrap
to go to the multi-record view.
Adjusting the Number of Rows in a Multi-Record View
Click the window with the right mouse button, select Options, adjust
the number of records you want to see in the window, and then click
OK. When the number of retrieved records exceeds the number of rows
in the window, the window scrolls up so that older records are erased.
