Chapter 1
General
Information
Available Options
14
EM13x Series SMART MULTIFUNCTION METER
change events with timestamps (see the EM13X Series MODBUS
Reference Guide)
1 relay output (standard) and two to four relay outputs (optional)
with 1-cycle update time; unlatched, latched, pulse and KYZ
operation; energy pulses
Display
Easy to read 2x16 characters LCD display, adjustable update time
Auto-scroll option with adjustable page exposition time; auto-return
to a default page
Programmable display auto-scroll sequence
Communications
Standard 2-wire RS-485 communication port; MODBUS RTU, DNP3,
SATEC ASCII and IEC 60870-5-101 communication protocols
Optional second communication port; MODBUS RTU, MODBUS/TCP,
DNP3, DNP3/TCP, SATEC ASCII, PROFIBUS DP, CANopen and IEC
60870-5-104 (over TCP) communication protocols
eXpertPower
client for communicating with the SATEC proprietary
eXpertPower
Internet services (with the Ethernet/GPRS module)
TCP notification client for communicating with a remote
MODBUS/TCP server on events or periodically on a time basis (with
the Ethernet/GPRS module)
Meter Security
Password security for protecting meter setups and accumulated data
from unauthorized changes
Upgradeable Firmware
Easy upgrading device firmware through a serial or Ethernet port.
Software Support
PAS™ – meter configuration and data acquisition SATEC Software
tool
eXpertPower™ – SATEC proprietary Internet services
1.2
Available Options
The EM13X Series can be provided with an optional expansion module
from the following list:
Digital I/O
Analog outputs
Ethernet communication port
PROFIBUS DP communication port
CANopen communication port
RS-232/RS-422/RS-485 communication port
Cellular communication port based on ENFORA GPRS or TELIT 3G or
4G engine
RF communication port
