Chapter 5
Configuring
the EM13X Series
Configuring Communications
EM13x Series SMART MULTIFUNCTION METER
79
Figure
5-4: eXpertPower Client Setup Tab
The following table lists available options. Refer to your eXpertPower
service provider for the correct network settings.
Table 6: eXpertPower Client Setup Options
Parameter
Options
Default
Description
XPW Server IP Address
207.232.60.18 The IP address of the
eXpertPower server
XPWServerPort
0-65535
5001
The TCP service port of the
eXpertPower server
XPW Client Enabled
NO, YES
NO
Enables operations of the
eXpertPower client
Time to Next Session,
min
1-99999
The time remaining to the
next connection session
NOTES
Do not enable the eXpertPower client in your meter if you do not use the
eXpertPower
TM
service.
Do not change the connection time setting. It is for information only. The
eXpertPower server updates it automatically.
Setting Up TCP Notification Client
The TCP notification client can establish connections with a remote
Modbus/TCP server and send notification messages either on events,
or periodically on a time basis.
To set up communications with a remote TCP Notification server, select
Communication Setup
from the
Meter Setup
menu, and then click
on the
TCP Notification Client Setup
tab.
Figure
5-5: TCP Notification Client Setup Tab
The following table lists available client options.
