Sartorius MC 210 S, Installation And Operating Instructions Manual

Page: 172 / 188

Important Note:
The operator shall be responsible for any
modifications to Sartorius equipment and for any
connections of cables or equipment not supplied
by Sartorius and must check and, if necessary,
correct these modifications and connections.
On request, Sartorius will provide information on the
minimum operating specifications (in accordance
with the Standards listed above for defined immunity
to interference).
Additional Directive for Weighing Instruments Used
in Legal Metrology:
Council Directive 90/384/EEC “Non-Automatic
Weighing Instruments”
This Directive regulates mass determination in legal
metrological applications, e.g., in
– the manufacture of pharmaceuticals
– medicine and health care
– calculation of fees
– price calculation
For the respective Declaration of Type Conformity
for weighing instruments approved for use as legal
measuring instruments with an EC Type-Approval
Certificate, see page 6–4.
This Directive also regulates the performance
of the EC verification by the manufacturer, provided
that an EC Type-Approval Certificate has been issued
(see page 5–5) and the manufacturer has been
accredited by an officer of a Notified Body registered
at the Commission of the European Community
for performing such verification.
On February 15, 1993, Sartorius AG received
accreditation for performing verification.
For information on the C mark on Sartorius equipment
and legal regulations currently applicable in your
country, and to obtain the names of the persons to
contact, please ask your local Sartorius office, dealer
or service center.
6–2