Sartorius MC 210 S, Installation And Operating Instructions Manual

Page: 109 / 188

De-activating the Differential Weighing and Backweighing Program during
a Weighing Procedure (“Standard Weighing Mode”)
To turn off the differential weighing and backweighing program function, press
w
.
The function keys will now be blocked and the identification symbols will no longer
be displayed.
Blocking the function keys ensures that the values you have stored will not be erased
by another operator or calculated based on an incorrectly entered backweighed
sample quantity, especially if you do not perform the differential weighing steps
immediately in succession. This allows you to weigh in the standard mode and
print weights in the meantime without affecting your other results.
Important Note:
If you turn off the differential weighing and backweighing program after tare
weighing, you will have to store the respective tare value again.
Clearing the Memory
How to delete data stored in individual memory locations:
– Select the respective memory location using the numeric keys and
F
– Hold down the
c
key for more than 2 seconds
How to delete the entire memory contents:
– Hold down the
i
key for more than 2 seconds
– When “
CLEArALL
” is displayed, press STO -
F
The entire memory contents will now be cleared and the clear function terminated.
If you do not wish to clear the entire memory, you can interrupt this procedure
by pressing
c
when “
CLEArALL
” is displayed.
! Caution!
If you press
F
when “
CLEArALL
” is displayed, all data stored
in the memory will be deleted.
Important Note for Verified Balances Approved for Use as
Legal Measuring Instruments:
You may not use the calculated value when the balance is being used
as a legal measuring instrument. The display symbol “R2” flashes to identify non-
verified weights (not legal for trade).
3–31