Follow the instructions carefully when
unpacking the analyzer:
§
Unpack the analyzer carefully and
gently.
§
Remove all the contents of the carton.
Check carefully to make sure you have
removed all accessory items.
§
The LMA110S consists of two modules,
a control module and a heater module.
Up to two heater modules
may be connected to a single control
module.
§
Inspect each module for physical dam-
age and report any damage immediately
to Sartorius or the distributor that you
purchased the analyzer from.
§
Verify that you have received the
following accessories:
Instructions for Recycling
the Packaging
To ensure adequate protection for safe
shipment, your moisture analyzer has
been packaged to the extent necessary
using environmentally friendly materi-
als. After successful installation of the
moisture analyzer, you should return
this packaging for recycling because
it is a valuable source of secondary raw
material. For information on recycling
options, including recycling of old
weighing equipment, contact your
municipal waste disposal center or local
recycling depot.
Equipment Supplied
– Inter-module cable
– Power module cable
– Pan support
– Pan shield
– Power cord
– Tweezers
– Sample pans
– Operating instructions manual
9
