78
Status
Result
}
Temperature info
Test Done
T est D o ne
D R Y M I L K P O W D E R
Recall
Setup
Users
Service
P r e s s S T A R T k e y t o b e g i n t e s t
Standby
3.45 % M
6 0
9 7
Current
Standby
7.48 % M
6 0
6 0
Current
1
3
0 5 / 0 1 / 2 0 1 1
0 2 : 4 0 P M
Multi-module Mode
The multi-module mode allows one
operator to simultaneously control up
to two heater modules connected to a
single Control Module. This is possible
by connecting each heater module to
a Mod Comm port on the back of the
Control Module.
To initiate an additional heater module:
§
Connect the inter-module cable.
§
Power off and back on again the heater
module that powers the control module
(press
Enter
to override Warm-up).
§
On power up, a scan is initiated to
determine which Mod Comm ports have
a heater module attached. If more than
one is connected, the screen will display
in the Multi-module mode. Note that
a double set of bars shows the active
heater module.
Multi-module screen description:
§
Heater module icon: Separate display of
heater module information including:
§
Status: warm-up, test done, pass/fail,
minutes in test
§
Test result
§
Current temperature and temperature
status
§
Program name: current program for
active heater module
§
Time and date
§
Recall
soft key: Select program for
active heater module
§
Setup
soft key: Access to global setup
§
Service
soft key: Access to specific
functions for active heater module
§
Users
soft key: Access to list of users for
active heater module
§
Warning box: Messages specific to
active heater module
Multi-module key functions:
§
Navigational keys (
right
and
left
Arrows
): Moves double bars to activate
heater module (or press keys 1–4).
§
Start|Stop
: Initiates test for active
heater module
