84
Regulatory Compliance
C
Marking
The Mark 3 LTE moisture analyzer
complies with the following EC
Directives and European Standards:
Council Directive 2004/108/EEC:
“Electromagnetic compatibility
(EMC)”
Applicable European Standards:
Limitation of emissions:
In accordance with product standard
EN 61326-1 Class B (residential
area)
Defined immunity to interference:
in accordance with product standard
EN 61326-1
(minimum test requirements,
un-monitored operation)
!
Class A Warning
Warning:
This is a class A product.
In a domestic environment this
product may cause radio interfer-
ence in wich case the user may
be required to take adequate
measures.
CSA Marking
Certificate: 2416856
Master Contact: 167555
Equipment Class 1
Pollution Degree 2
Installation Category II
CLASS 8721 05 - LABORATORY
EQUIPMENT - Electrical
CLASS 8721 85 - ELECTRICAL
EQUIPMENT FOR LABORATORY USE
- Certified to US Standards
Note:
The operator shall be responsible for any
modifications to Sartorius equipment
and for connections of cables not sup-
plied by Sartorius and must check and, if
necessary, correct these modifications.
On request, Sartorius will
provide information on the minimum
operating specifications in accordance
with the standards listed above for
defined immunity to interference.
Council Directive 2006/95/EC:
“Electrical equipment designed for use
within certain voltage limits”
Applicable European Standards:
EN61010-1: 2001
Safety requirements for electrical
equipment for measurement, control and
laboratory use
Part 1: General requirements
If you use electrical equipment in
installations and under ambient condi-
tions subject to stricter safety standards
than those described in the manual,
you must comply with the provisions as
specified in the applicable regulations for
installation in your country.
