The Mark 3 LTE Moisture Analyzer is designed to
test moisture content in a large variety of materials
including powders, pastes and liquids. The perform-
ance of the analyzer is dependent upon selecting
optimum drying analysis conditions for your specific
sample type. Sartorius will support you in finding
the set of testing parameters (referred to as a pro-
gram) you need for your specific tests. On request,
we will provide a chart of the parameters and test
results we have compiled by testing samples in our
laboratory and comparing the results to those
obtained by reference methods.
If our chart of applications shows a drying program
that is not already programmed into your analyzer,
you may do this yourself by following the instruc-
tions under Setup in this manual.
Standby Screen
During warm-up, your analyzer will enter the Stand-
by mode and the Standby screen will be displayed.
It is from the Standby (or Test Done) screen that all
functions of operating the analyzer, including test-
ing samples and setting parameters, take place.
The standby screen shows the following
information:
§
Program name
§
Time and date
§
Standby temperature and actual temperature
§
Various soft keys for options that are available
depending on the security setup options engaged
§
Warnings that will need to be addressed before
testing
21
Operating
the Moisture Analyzer
D R Y M I L K P O W D E R
S t a n d b y
Recall
Setup
Weigh
Users
P r e s s S T A R T k e y t o b e g i n t e s t
Standby
Current
6 0
5 9
0 5 / 0 1 / 2 0 1 1
0 2 : 1 8 P M
V e r . 1 . 0 0 . 0 0
M a r k 3 L T E M o i s t u r e A n a l y z e r
