The display will prompt you, the
operator to remove the sample
before the next sample can be test-
ed. Open the hood and carefully
remove this sample using tweezers,
and while the hood is open, add
the sample pan for the next sample
to be tested.
Caution
!
The sample is hot during and after
the test. Remove the sample with
care by using the tweezers provided
with the analyzer. Do not touch
any internal part of the heating
chamber or pan shield as they will
be very hot.
Press the
Start|Stop
key to begin the
next test using the same program.
Note
The analyzer balance must be calibrated
before putting the unit into routine
service. See the section on Calibrate
Balance in this manual.
27
