62
To deactivate security:
§
From the Setup menu screen press the
8
key or
highlight Security and press the
Enter
key.
§
Type the set pass code and press the
Enter
key.
The security protection of the analyzer will now be
deactivated.
Setup Security Access
Sections of the analyzer setup configuration and
other features can be security protected with the
pass code at the discretion of the primary operator.
To set up security access:
§
If security is On, first deactivate security as described
above.
§
From the Security menu screen, press the
2
key or
highlight “Set up security access” and press the
Enter
key to display the Security access screen.
§
From the list of features, select either On or Off to
activate or deactivate, respectfully, each feature.
§
Press the respective number key to toggle On or Off,
or highlight the selection and press the
On|Off
soft
key.
§
Press the
Arrow
soft key to return the Security menu.
§
Security must be set On in the Security menu to
activate.
Note
If a selection from the Security access list is activated
(showing On next to the listing in the Security
access screen) and the security mode has been
enabled under “Set pass code On|Off,” then when
an operator tries to enter this selection, the Pass
code screen will appear. The only way to enter this
selection is to enter the correct pass code which
deactivates security.
S e c u r i t y a c c e s s
On/Off
0 5 / 0 1 / 2 0 1 1
0 2 : 4 0 P M
1 ) P r o g a m m a n a g e :
2 ) D a t a l o g :
3 ) M o d i f y o p e r a t o r s :
4 ) R e s u l t s p r i n t o u t f o r m a t :
5 ) T i m e a n d d a t e
6 ) C o m m u n i c a t i o n p o r t s :
7 ) C o n s e r v e m o d e :
9 ) A u d i o
&
v i d e o :
0 ) S e r v i c e :
O n
O n
O n
O n
O n
O n
O n
O n
O n
