Display Modes
The large quarter VGA display is designed to make
operation and setting up the analyzer easy through
of detailed information in clear descriptions, choices
or menus. The analyzer will display information in
several different formats as described below:
Warm-up:
This mode is entered whenever the analyzer is pow-
ered on. The warm-up period ensures that the ana-
lyzer is properly conditioned before testing is begun.
During warm-up the screen will be mostly blank.
Standby (or Test Done):
In this mode the analyzer is in an ideal status.
This is the period between testing samples.
The temperature of the chamber is controlled to a
particular level based on the Standby temperature
set for the last test performed. The screen will display
the program name, date and time, temperature and
the last result, if a test has been run.
Test:
This mode is entered when the
Start|Stop
key
is pressed to initiate a test. The screen is similar in
design to the Standby mode but also includes
prompts to guide the operator through the steps
of adding a sample, entering an ID, if desired, and
displaying the result when the test is completed.
D e f a u l t
0 5 / 0 1 / 2 0 1 1 0 2 : 1 4 P M
W A R M I N G U P
V e r . 1 . 0 0 . 0 0
M a r k 3 L T E M o i s t u r e A n a l y z e r
Recall
Setup
Weigh
Users
P r e s s E N T E R t o o v e r r i d e w a r m u p
D e f a u l t
0 5 / 0 1 / 2 0 1 1 0 2 : 1 4 P M
W A R M I N G U P
V e r . 1 . 0 0 . 0 0
M a r k 3 L T E M o i s t u r e A n a l y z e r
Recall
Setup
Weigh
Users
P r e s s E N T E R t o o v e r r i d e w a r m u p
A d d s a m p l e t o p a n
D R Y M I L K P O W D E R
0 5 / 0 1 / 2 0 1 1 0 2 : 1 4 P M
M o d u l e 1
0.000
g
Zero
{ }
0%
Standby
Current
60
57
17
