Maintenance
SY135C Excavator OMM
5-52
Operation and Maintenance Manual — 0120
SANY
5. Turn the fuel shutoff valve (1) 1/4 turn
counterclockwise to the OFF position.
6. Open the drain valve (2) to allow all water and fuel to
drain from the fuel filter/water separator.
7. Close the drain valve.
8. Remove the filter housing (3).
9. Remove the filter (4) from the filter body (5).
10. Replace the filter and make sure it is securely seated
within the filter body.
11. Fill the filter housing with clean fuel.
12. Install the filter housing.
13. Turn the fuel shutoff valve 1/4 turn clockwise to the
ON position.
14. Start the engine and allow it to run at idle speed. See
“Engine Starting Procedures” on page 4-12.
15. Check for leaks in the fuel system.
16. Shut down the engine.
17. Close the right rear access door.
Fig. 5-108
0000508
1
2
3
4
5
