SUNWAY M XS 7500TL
INSTALLATION AND
PROGRAMMING INSTRUCTIONS
34/
148
3.6.2. Setting the Country
NOTE
Changing the Country affects the configuration of the grid interface of the
inverter.
NOTE
The grid interface configuration based on the Country where the inverter is
installed may be changed only
within the first 12 hours after the
commissioning of the inverter
. After this time interval, the Country setting
may be changed only by the Customer Service of Elettronica Santerno
SpA.
This section describes how to change the Country where the inverter is to be installed. Do the following:
−
From the start menu, select the
Tools
(
) icon;
−
Select the
Quick Configuration
(
) menu. Use the arrows (
) on the Status
Bar to go to the first page of each submenu;
−
Select
P040 - Country
; the screen below appears:
Figure 21: Country setting page
−
Select the desired Country;
−
Activate your choice by pressing the
Save
(
) button and confirm with
. The
system automatically quits the current page. If you press
Cancel
(
), the previous settings
are maintained.
