VT-100 UTILITY CONFIGURATION
75
4
.5.3.1.4 Strip Size
This parameter sets the size of the stripe written to each disk in
a RAID 0, 1, 10, 5 or 6 logical drive. You can set the stripe size
to 4 KB, 8 KB, 16 KB, 32 KB, 64 KB or 128 KB.
Arrow Key: Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Sans Digital
RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Configuration-
View System Events
Clear Event Buffer
Hardware Monitor
System information
Volume Set Function
Volume Set Function
Delete Volume Set
Modify Volume Set
Check Volume Set
StopVolume Check
Display Volume Info.
Create Volume Set
Create Volume From Raid Set
Raid Set # 01
Raid Set # 00
Volume Creation
Volume Name : ARC-5060-VOL # 00
Raid Level : 5
Capacity : 1000.0GB
Stripe Size : 64K
Host Channel : SATA/139
Drive Number : 1
Cache Mode : Write Back
SATA Xfer Mode : NCQ
Stripe Size : 64k
Select Strip Size
4K
8K
16K
32K
128K
64K
A larger stripe size produces better-read performance, espe-
cially if your computer does mostly sequential reads. However,
if you are sure that your computer does random reads more
often, select a small stripe size.
4
.5.3.1.5 Host Channel
There are two kinds of host map to two internal channels for
each volume. Different channel host can map to and access the
same volume. But user can only write multiple hosts’ volume
through one host each time for data consistency
For channel 0 host:
SATA: eSATA0 host can access to the volume sets which
configure for eSATA0 host.
SATA: eSATA1 host can access to the volume sets which
configure for eSATA1.
For channel 1 host:
USB: USB host channel can access to the volume set.
