VT-100 UTILITY CONFIGURATION
77
USB2.0 host system, the host port can support up to 16 volume
sets (Drive# number from 0 to 15). Assign the drive# value
from number 0.
Up to 16 volumes can support on each EliteRAID RAID
subsystem. When both hosts map to the same volume, select
both host allowable drive number for this volume. If you can’
t map both host on the same driver number, then you can not
map both host to same volume.
4
.5.3.1.7 Cache Mode
User can set the cache mode to: Write-Through Cache or Write-
Back Cache.
4
.5.3.1.8 SATA Xfer Mode
The EliteRAID RAID controller can support up to SATA ll, which
runs up to 300MB/s. NCQ is a command protocol in Serial ATA
that can only be implemented on native Serial ATA hard drives.
It allows multiple commands to be outstanding within a drive at
the same time. Drives that support NCQ have an internal queue
where outstanding commands can be dynamically rescheduled
or re-ordered, along with the necessary tracking mechanisms
for outstanding and completed portions of the workload. The
RAID controller allows user to choose the SATA Mode (slowest
to fastest): SATA150, NCQ, SATA300, NCQ.
Arrow Key: Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Sans Digital
RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Configuration-
View System Events
Clear Event Buffer
Hardware Monitor
System information
Volume Set Function
Volume Set Function
Delete Volume Set
Modify Volume Set
Check Volume Set
StopVolume Check
Display Volume Info.
Create Volume Set
Create Volume From Raid Set
Raid Set # 01
Raid Set # 00
Volume Creation
Volume Name :
EliteRAID
-VOL # 00
Raid Level : 5
Capacity : 1000.0GB
Stripe Size : 64K
Host Channel : SATA/139
Drive Number : 1
Cache Mode : Write Back
SATA Xfer Mode : NCQ
Cache Mode :Write Back
Volume Cache Mode
Write Back
Write Through
