LCD CONFIGURATION MENU
35
3
.7.4.1.1 Volume Name
The default volume name will always appear as Volume Set.
#. You can rename the volume set name providing it does not
exceed the 15 characters limit.
3
.7.4.1.2 Raid Level
The RAID controller can support raid lev
el 0, 1, 10, 1E, 3, 5 or 6.
3.
7.4.1.3 Stripe Size
This parameter sets the size of the segment written to each
disk in a RAID 0
, 1, 10, or 5
logical drive. You can set the stripe
size to 4 KB, 8 KB, 16 KB, 32 KB, 64 KB, or 128 KB.
A larger stripe size produces better-read performance,
especially if your computer does mostly sequential reads.
However, if you are sure that your computer does random reads
more often, select a small stripe size.
Figure 3.7.4.1-1
