126
WEB BROWSER-BASED CONFIGURATION
5
.7.3 Alert By Mail Config
To configure the raid controller mail function, move the cursor bar
to the main menu and click on the “System Controls” link. The
“System Controls” menu will show all items. Move the cursor bar
to the “Alert By Mail Config” item, then press Enter
key to select
the desired function. This function can only set by the web-based
configuration.
The firmware contains SMTP manager monitors all system events
and user can select either single or multiple user notifications to
be sent via “Plain English” e-mails with no software required.
When you open the mail configuration page, you will see following
settings:
SMTP server IP Address: Enter the SMTP server IP address which
is not McRAID storage manager IP. Ex: 192.168.0.2
Sender Name: Enter the sender name that will be shown in the
outgoing mail. Ex: RaidController_1
Mail address: Enter the sender email that will be shown in the
outgoing mail, but don’t type IP to replace domain name.
Account: Enter the valid account if your SMTP mail server need
authentication.
