LCD CONFIGURATION MENU
32
Note:
1. Once the “Expand Raid Set” process has started, user
can not stop it. The process must be completed.
2. If a disk drive fails during raid set expansion and a hot
spare is available, an auto rebuild operation will occur after
the raid set expansion completes.
3.
7.3.3 Expand Raid Set
Instead of deleting a raid set and recreating it with additional
disk drives, the “Expand Existed Raid Set” function allows the
user to add disk drives to the raid set that was created.
To expand existed raid set, press
UP/DOWN
buttons to choose
the “Expand Raid Set” option. Using
UP/DOWN
buttons to
select the raid set number that user want to expand and then
press
ENT
to accept the raid set number. If there is an available
disk, then the “Select Drive IDE Channel x” appears. Using up
and down arrow to select the target disk and then press
ENT
to
select it. Press
ENT
to start expanding the existed raid set. The
new add capacity will be define one or more volume sets. Follow
the instruction presented in the “Volume Set Function” to create
the volume sets.
Migrating occurs when a disk is added to a raid set. Migration
status is displayed in the raid status area of the “Raid Set infor-
mation” when a disk is added to a raid set. Migrating status is
also displayed in the associated volume status area of the vol-
ume set information when a disk is added to a raid set.
3
.7.3.4 Offline RAID Set
Press
UP/DOWN buttons to choose the “Offline RAID Set”
option. This function is for coutomer being able to mount and
remount a multi-disk volume. All Hdds of the selected Raidset
will be put into offline state, spun down and fault LED will be in
fast blinking mode.
