VT-100 UTILITY CONFIGURATION
94
Arrow Key: Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Sans Digital
RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid System Function
Raid System Function
Mute The Alert Beeper
Alert Beeper Setting
Change Password
JBOD/RAID Function
Background Task Priority
Maximum SATA Mode
Host NCQ Mode Setting
HDD Read Ahead Cache
Volume Data Read Ahead
Stagger Power On
Spin Down Idle HDD
Empty HDD Slot LED
HDD SMART Status Polling
Auto Activate Raid Set
Capacity Truncation
Terminal Port Config
Update Firmware
Shutdown Controller
Restart Controller
HDD SMART Status Polling
HDD SMART Stautus Polling
Disabled
Enabled
Disabled
4
.5.5.13 HDD SMART Status Polling
"HDD SMART Status Polling" was added to enable scanning of
the HDD temperature function. It is necessary to enable “HDD
SMART Status Polling” function before SMART information is
accessible. This function is disabled by default.The following
screen shot shows how to change the setting to enable the
polling function.
4
.5.5.14 Auto Activate Raid Set
When some of the disk drives are removed in power off state
or boot up, the raid set state will change to Incomplete State.
But if a user wants to automatically continue to work while the
SAS RAID controller is powered on, the user can set the auto
Activate Raid Set option to enable. The Raid State will change to
Degraded Mode while it powers on.
