LCD CONFIGURATION MENU
41
Figure 3.7.5-2
3
.7.5.1 Display Drive Information
Using
UP/DOWN
buttons to choose the “Display Drive Informa-
tion” option and press
ENT
. Using
UP/DOWN
buttons to select
the drive IDE number that user want to display. The drive infor-
mation will be displayed. The drive information screen shows the
Model Name, Serial Number, Firmware Rev., Device Capacity,
Current SATA, Supported SATA, and Device State.
3
.7.5.2 Create Pass Through Disk
Disk is no controlled by the RAID controller firmware and thus
cannot be a part of a raid set. The disk is available to the op-
erating system as an individual disk. It is typically used on a
system where the operating system is on a disk not controlled
by the RAID controller firmware. Using UP/DOWN
buttons to
choose the “Create Pass-Through Disk” option and press
ENT.
Using
UP/DOWN
buttons to select the drive IDE number that
user want to create. The drive attributes will be displayed.
The attributes for Pass-Through disk show the Cache Model,
Host Channel, Drive Number, and SATA Xfer Mode.
