LCD CONFIGURATION MENU
45
3
.7.6.1 Mute The Alert Beeper
The “Mute The Alert Beeper” function item is used to control the
RAID controller beeper. Select
No
and press
ENT
button to turn
the beeper off temporarily. The beeper will still activate on the
next event.
3
.7.6.2 Alert Beeper Setting
The “Alert Beeper Setting” function item is used to disabled or
enabled the RAID controller alarm tone generator. Using the
UP/DOWN
buttons to select “Alert beeper Setting” and press
ENT
to accept the selection. After completed the selection, the
confirmation screen will be displayed and then press ENT
to
accept the function. Select the “Disabled” and press
ENT
key in
the dialog controller to turn the beeper off.
3
.7.6.3 Change Password
To set or change the RAID controller password, press the
UP/
DOWN
buttons to select “Change Password” option and then
press
ENT
to accept the selection. The New Password: screen
appears and enter new password that user want to change.
Using
UP/DOWN
buttons to set the password value. After
completed the modification, the confirmation screen will be
displayed and then press
ENT
to accept the function. Do not use
spaces when you enter the password, If spaces are used, it will
lock out the user. To disable the password, press
ENT
only in the
New Password: column. The existing password will be cleared.
No password checking will occur when entering the main menu
from the starting screen.
3
.7.6.4 JBOD/RAID Mode Configuration
JBOD is an acronym for “Just a Bunch Of Disk”. It represents a
volume set that is created by the concatenation of partitions on
the disks. User needs to delete the RAID set, when you want to
change the option from the RAID to the JBOD function.
