LCD CONFIGURATION MENU
33
3
.7.3.5 Activate Incomplete RaidSet
When one of the disk drive is removed in power off state, the
raid set state will change to Incomplete State. If user wants to
continue to work, when the RAID controller is power on. User
can use the “Activate Incomplete RaidSet” option to active the
raid set. After user completed the function, the Raid State will
change to Degraded Mode.
3
.7.3.6 Create Hot Spare Disk
Please refer to this chapter section 4.4. Designating drives as
Hot Spares.
3
.7.3.7 Delete Hot Spare Disk
To delete hot spare, press
UP/DOWN
buttons to choose the
“Delete Hot Spare Disk” option. Using
UP/DOWN
buttons to
select the hot spare number that user want to delete and then
press
ENT to select it. The confirmation screens appear and
press
ENT
to delete the hot spare.
3
.7.3.8 Display Raid Set Information
Choose the “Display Raid Set Information” option and press
ENT
. Using
UP/DOWN
buttons to select the raid set number.
Then the raid set information will be displayed.
Using
UP/DOWN
buttons to see the raid set information, it will
show Raid Set Name, Total Capacity, Free Capacity, Number of
Member Disks, Min. Member Disk Capacity, Raid Set State and
Raid Power Status.
