CONFIGURATION METHOD
20
2.
4 Configuration Menu Tree
The following is an expansion of the menus in configuration Util
-
ity that can be accessed through the LCD panel, RS-232 serial port
and LAN port.
2.
3 Web browser-based RAID manager
To configure
EliteRAID
RAID controller a local or remote machine,
you need to know its IP Address. The IP address will default
show in the LCD screen or Ethernet Configuration option on the
VT100 utility configration. Launch your firmware-embedded TCP/
IP & Web Browser-based RAID manager by entering http://[IP
Address] in the web browser.
The provided LAN interface cable connects the EliteRAID RAID
controller LAN port into a LAN port from your local network.
Use only shield cable to avoid radiated emission that may cause
interruptions. To ensure proper communications between the
RAID controller and Web browser-based RAID management,
Please connect the RAID controller Ethernet LAN port to any LAN
switch port.
The EliteRAID RAID controller has embedded the TCP/IP & Web
Browser-based RAID manager in the firmware. User can remote
manage the RAID controller without adding any user specific
software (platform independent) via standard web browsers
directly connected to the 10/100 Ethernet RJ45 LAN port.
The Storage Console current configuration screen displays the
current configuration of your
EliteRAID
RAID controller. Detail
procedures please refer to the Chapter 6 Web Browser-based
configuration method.
Note:
You must be logged in as administrator with local admin
rights on the remote machine to remotely configure it.
The RAID controller default user name is “admin” and the
password is “0000”.
