GS-818 GPS/GSM/GPRS Vehicle Tracker User Manual
20 Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.
Set up Phone Book List
There are three main purposes of Phone Book List setup:
1. Backup route: As a backup route when the data is not able to send to the server. The data will be sent to 1
st
cellular
number PH-01 only.
2. SOS Alarm Route: When the device is in SOS mode, it will send SOS alarm report to the phone numbers in the list.
3. SMS Data Route: When the data route is set to SMS only, the device will send GPRMC data to the cellular phone
numbers in the list by SMS message. (Please refer to Set up Route for Transmitting Data)
Use this SMS command to set up the cellular phone book (Max. of 3 numbers) as the following format:
Setup format: #
「
User Name
」
,
「
Password
」
,
「
Function Code
」
,
「
PH-01
」
,
「
PH-02
」
,
「
PH-03
」
,
「
Bookmode Code
」
*
Command: #username,0000,5,+886123492234866323456789,7*
Note1: Add or not add the “+ “sign in front of the cellular phone number(s) are both acceptable, while the”+” sign should
precede the international call prefixes.
Note2: When Report route is set at 4. SMS MODE without setting up Bookmode Code, the device will assign all the
numbers in Phone Book List to receive SMS message and GPS data. The default Bookmode is 1 when only PH-01 is set,
the default Bookmode is 3 when both PH-01 and PH-02 are set, and the default Bookmode is 7 when all the numbers
PH-01, PH-02 and PH-03 are set. Please refer to Table: Phone Number List Setup Format Description for detail.