Sanav GS-818 User Manual Download Page 2

Page: 2 / 79

GS-818 GPS/GSM/GPRS Vehicle Tracker User Manual

GS-818 User Documentation

Introduction

SANAV GS-818 is specially designed for vehicle tracking applications, equipped with

Siemens GSM module and CSR SiRF Star III GPS Receiver. The rugged metallic

structure is a best match for in-car environments. Opened I/Os are provided for

versatile applications. The user can communicate with the service server through

GPRS/GSM network with real-time tracking through SMS/http/TCP and UDP protocols,

transfer alarms of Emergency, over speed, Geo-fencing…etc, and record the tracking

history stored in internal flash memory if GSM service is not available

This User Manual details the specification, hardware introduction, SMS commands and

Tracker Status of GS-818. If you have any question about the operation of GS-818,

please contact SANAV Customer Service [email protected].

Disclaimer

This document, and all other related products, such as device, firmware, and software,

is developed by San Jose Technology Inc. thoroughly. At the time of release, it is most

compatible with specified firmware version. Due to the functionalities of the devices

are being developed and improved from time to time, the change in the protocol,

specification, and firmware functions are subjects to change without prior notice.

SANAV is obligated to modify all the documentation without the limitation of time

frame. A change notice shall be released to San Jose Technology Inc. customers upon

the completion of document modification.

San Jose Technology Inc. products are not intended to be used as life support or

rescue equipments. San Jose Technology Inc. is not liable for any loss or injury caused

by using or referencing to any products. Any possible means of using or integrating

San Jose Technology Inc. products shall be avoided.

Copyright

The information in this publication is proprietary to San Jose Technology, Inc.

No part of this publication may be used, disclosed, reproduced, adapted, translated,

stored in a retrieval system, or transmitted in any form of or by any means, electronic

or mechanical, for any purpose, without the prior written permission of San Jose

Technology, Inc. although every precaution has been taken in the preparation of this

publication, San Jose Technology, Inc., assumes no (i) responsibility for errors or

omissions contained herein or (ii) liability for any damages resulting from the use of

information contained herein. Information in this publication is subject to change

without notice.

Summary of Contents for GS-818














































































Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands

Sanav GS-818, User Manual

Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands