Sanav GS-818 User Manual Download Page 63

Page: 63 / 79

GS-818 GPS/GSM/GPRS Vehicle Tracker User Manual

Reset to Default Setting

Use this SMS command to reset the device to default/factory setting. It will recover all the current parameters to default

values includes username and password.

Setup format

：

「

User Name

」

「

Password

」

「

Function Code

」

Command: #username,0000,9*

Table: Reset Format Description

Table: Reset Response Description

SMS Text

Description

Start sign.

username



Default user name of the device.



If you have changed the username, please use the updated one.

0000



Default password.



If you have changed the password, please use the updated one.

Mode 9 defines Reset mode.

End sign.

Situation

Response

Setup Succeeds

[username] + Setup OK. Device resets to default

Setup Fail

[username] + Reset Fail!

Incorrect password

[username] + Password setup Fail!

Incorrect username or

command format

[username] + command error

Summary of Contents for GS-818














































































Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands

Sanav GS-818, User Manual

Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands