Sanav GS-818 User Manual Download Page 46

Page: 46 / 79

GS-818 GPS/GSM/GPRS Vehicle Tracker User Manual

Set up SOS Alarm Report Interval

User can use this SMS command to define the SOS alarm report interval and times by following the format below.

Setup format: #

「

User Name

」

「

Password

」

「

Function Code

」

「

SOS alarm report interval

」

「

SOS alarm report times

」

Command: #username,0000,15,60,3*

Note that SOS alarm report interval ranges from 1~65000 seconds; SOS alarm report times ranges from 1~9999

times.9999 times means infinite.

The default value for SOS alarm report interval ranges is 60 seconds and 3 times.

Table: SOS Alarm Report Interval Setup Format Description

Table: SOS Alarm Report Interval Setup Response Description

SMS Text

Description

Start sign.

username



Default user name of the device.



If you have changed the username, please use the updated one.

0000



Default password.



If you have changed the password, please use the updated one.

Function Code

It defines the report interval setup (in this case, one report per 60s)

It defines how many times the SOS alarm report will be sent to the defined Server.

(in this case, 3 times)

End sign.

Situation

Response

Setup Succeeds

username, setup OK. Device Panic report setting is updated.

Emergency Mode

Username, in emergency, setup stop.

Summary of Contents for GS-818














































































Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands

Sanav GS-818, User Manual

Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands