Sanav GS-818 User Manual Download Page 39

Page: 39 / 79

GS-818 GPS/GSM/GPRS Vehicle Tracker User Manual

Set up Geo-Fence Coordinates

A Geo-Fence is a virtual perimeter for a real-world geographic area.

Geo-Fencing is a term utilized primarily in the corporations that refers to the practice of limiting mobile employees to a

specific geographic location by tracking their whereabouts via the GPS. The purpose of geo-Fencing is to ensure a

company’s mobile employees travel locally or drive company vehicles as part of their job, stay within the boundaries the

company deems productive. It is essentially another way for large corporations and businesses to monitor their

employees’ actions at work.

User can set up the Geo-Fence coordinates by entering SMS command below. The Geo-Fence coordinates (gf1~gf10) are

defined as a round (circular) area. Therefore, the coordinate is the center and the radius is defined in meter.

There are totally 10 groups of Geo-Fence coordinates can be set and saved.

Setup format

：

「

User Name

」

「

Password

」

「

Function Code

」

「

Latitude

」

「

Longitude

」

「

Radius

」

「

GF Code

」

Command: #username,0000,gf1,25.002006,121.595135,500,3*

Table: Geo-Fence Coordinate Setup Format Description

Table: Geo-Fence Coordinate Setup Response Description

SMS Text

Description

Start sign.

username



Default user name of the device.



If you have changed the username, please use the updated one.

0000



Default password.



If you have changed the password, please use the updated one.

gf1

Mode gf1~gf10 defines Geo-Fence setup mode. Totally 10 Geo-Fence coordinates can be set.

25.002006

Latitude (degree) from 90.000000 to -90.000000

121.595135

Longitude (degree) from 180.000000 to -180.000000

500

Geo-Fence circle radius

Close Geo-Fence Detection

It will trigger the alarm when the tracker is outside the Geo-Fence.

It will trigger the alarm when the tracker is inside the Geo-Fence.

0/1/2/3

It will trigger the alarm when the tracker is either outside or inside the Geo-Fence.

End sign.

Situation

Response

Success

username, GF1 setup OK.

Incorrect function code

username, GF1 setup fail.

Summary of Contents for GS-818














































































Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands

Sanav GS-818, User Manual

Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands