Sanav GS-818 User Manual Download Page 18

Page: 18 / 79

GS-818 GPS/GSM/GPRS Vehicle Tracker User Manual

Request IMEI Number

IMEI stands for International Mobile Equipment Identification, a unique number for identifying mobile devices validity in

GSM network.

As above stated, each device has a unique IMEI number. Entering the SMS command as the following allows user to check

the IMEI number of the device for network registration and tracking.

Setup format

：

「

User Name

」

「

Password

」

「

Function Code

」

Command: #username,0000,imei*

Table: IMEI Inquiry Format Description

Table: IMEI Inquiry Response Description

SMS Text

Description

Start sign.

username



Default user name of the device.



If you have changed the username, please use the updated one.

0000



Default password.



If you have changed the password, please use the updated one.

imei

Mode imei defines IMEI inquiry mode.

End sign.

Situation

Response

Setup Succeeds

[username] + “,[imei]”

Incorrect password

[username] + Password setup Fail!

Incorrect username or

command format

[username] + command error

Summary of Contents for GS-818














































































Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands

Sanav GS-818, User Manual

Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands