Sanav GS-818 User Manual Download Page 33

Page: 33 / 79

GS-818 GPS/GSM/GPRS Vehicle Tracker User Manual

Acquire the Report of Current Position

When Auto Report function is enabled, the device will send Auto Report to specified route periodically. But user can send

the SMS (SMS Polling) according to the example shown below to have the device send GPS data right away if needed. It

will transmit current GPS data to the server or assigned route at once. While the route is set to SMS mode, it will transmit

current data to your cellular phone that you sent the SMS Polling command to the device

Setup format

：

「

User Name

」

「

Password

」

「

Function Code

」

Command: #username,0000,10*

Table: SMS Polling Format Description

SMS Text

Description

Start sign.

username



Default user name of the device.



If you have changed the username, please use the updated one.

0000



Default password.



If you have changed the password, please use the updated one.

Mode 10 defines SMS Polling mode.

End sign.

Summary of Contents for GS-818














































































Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands

Sanav GS-818, User Manual

Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands