Sanav GS-818 User Manual Download Page 27

Page: 27 / 79

GS-818 GPS/GSM/GPRS Vehicle Tracker User Manual

Set up URL

This SMS command instructs the device to transmit GPS (GPRMC) positioning data to a specified URL (Uniform Resource

Locator) or IP address of HTTP protocol server for real time GPS tracking.

Entering the SMS command as the following allows user to changes the address to

“http://www.sanav.com/eric-gga/gprs.aspx “. The address will be assigned to receive the GPS data sent by THE DEVICE.

Setup format

：

「

User Name

」

「

Password

」

「

Function Code

」

「

URL or IP

」

Command: #username,0000,4,http://www.sanav.com/eric-gga/gprs.aspx*

Note1: The question mark “?” or any symbol is not allowed to be entered behind the URL. The DEVICE will add the

necessary symbol(s) on automatically.

Note2: For setting up TCP/IP (Transmission Control Protocol) or UDP/IP (User Datagram Protocol) server, please refer to

Set up TCP or UDP/IP.

Note3: HTTP, TCP/IP, UDP/IP and SMS are different protocols (routes). Please refer to Set up Route for Data

Transmission to set up corresponded route code for GPS data transmission.

Table: URL or IP Setup Format Description

Table: URL or IP Setup Response Description

SMS Text

Description

Start sign.

username



Default user name of the device.



If you have changed the username, please use the updated one.

0000



Default password.



If you have changed the password, please use the updated one.

Mode 4 defines GPS data transmission route URL or IP setup mode.

http://www.sanav.com/eri

c-gga/gprs.aspx

Default domain name, sign “?” is not allowed to write in the area.

End sign.

Situation

Response

Setup Succeeds

[username] + Device IP/Domain is updated.

Setup Fail

[username] + IP/Domain setup Fail!

Incorrect password

[username] + Password setup Fail!

Incorrect username or

command format

[username] + command error

Summary of Contents for GS-818














































































Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands

Sanav GS-818, User Manual

Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands