Sanav GS-818 User Manual Download Page 54

Page: 54 / 79

GS-818 GPS/GSM/GPRS Vehicle Tracker User Manual

I/O Output Activation

Use this command to switch on or off the device output actions. Entering the switch on command will have the device

generate output voltage to activate the device connected to the device Output pins.

Command format: #

｢

username

｣

｢

Password

｣

｢

o1/o2

｣

｢

0,1

｣

Command: #username,0000,o1,0*

Table: I/O Output Detection Setup Format Description

Table: I/O Output Detection Setup Response Description

SMS Text

Description

Start sign.

username

*Default user name of the device.

*If you have changed the username, please use the updated one.

0000

*Default password.

*If you have changed the password, please use the updated one.

Mode “o1” defines o1 status setup mode. o1 to o2 setup are available

0/1

0 Switch off the output detection

1 Switch on the output detection

End sign.

Situation

Response

Success

(Switch on output I/O)

username, setup OK. Device I/O output 1/2 is switched on

Success

(Switch off output I/O)

username, setup OK. Device I/O output 1/2 is switched off

Summary of Contents for GS-818














































































Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands

Sanav GS-818, User Manual

Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands