Sanav GS-818 User Manual Download Page 56

Page: 56 / 79

GS-818 GPS/GSM/GPRS Vehicle Tracker User Manual

External Device Setting

Currently GS-818 supports 3 types of external devices:

1. Barcode Reader (Scanner)

2. RFID Reader

3. Garmin PND (

Portable Navigation Device)

For Barcode Reader and RFID Reader applications, the regular GPRMC data will be reported with Barcode or RFID

information when scanning the Barcode or RFID from the reader which is connected to the device.

For Garmin PND application, the device can communicate with Garmin PND and server as a “bridge”, and then send the

message to the server from PND.

Following is the SMS command to set up the External Device application. For the detail, please refer to the related

manuals.

Setup format: #

｢

username

｣

｢

Password

｣

｢

device

｣

｢

1/5/0

｣

Command: #username,0000,device,1*

Table: External Device Setup Format Description

Table: External Device Setup Response Description

SMS Text

Description

Start sign.

username



Default user name of the device.



If you have changed the username, please use the updated one.

0000



Default password.



If you have changed the password, please use the updated one.

device

Mode ‘device’ means Ext.device setup mode

1 Enable Device

Barcode Scanner

(Default:9600 bps) or

RFID Reader

(Default:9600 bps)

5 Enable Device

Garmin PND

(Default:9600 bps)

0 Disable Device

End sign.

Situation

Response

Success

username, ext.device setup OK.

Incorrect function code

username, ext.device setup fail.

Summary of Contents for GS-818














































































Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands

Sanav GS-818, User Manual

Search results

Summary of Contents for GS-818

Reviews:

Related manuals for GS-818

Brands by name

Popular brands