Samsung SVR-1680 User Manual Download Page 82

Page: 82 / 97

User Manual

7.5.7 Event Data

A real-time log of event information is displayed below the monitoring page. Items found

in this log are as shown below.

(Table Event Icon)

Button Function

Change setup

Motion detection

Sensor

Relay On

V-loss

Text Input

User Login

7.5.8 Video Recording & Video Storage

7.5.8.1 Video

Recording

To record the visual data from the monitoring mode, select the channel, right-click and select

"Rec Start". Up to 10 minutes of video may be recorded in this manner. If a Quick Recording

operation is executed, the duration of the recording will be displayed on the

visual.

Selecting "Rec Stop" while recording will conclude the recording operation. A dialogue window

regarding the file location will be prompted and the user may save the file in any desired

directory. The recording will save as a .re4 file, which can be played in NETWORK MANAGER

Playback Program or a Mini-Player.

7.5.8.2 Save

Image

The visual image may be saved as a .jpg, .bmp or .eye file and will save the frame currently

displayed on the monitoring screen. To save an image, right-click the channel to save image

Summary of Contents for SVR-1680


































































































Search results

Summary of Contents for SVR-1680

Reviews:

Brands by name

Popular brands

Samsung SVR-1680, User Manual

Search results

Summary of Contents for SVR-1680

Reviews:

Brands by name

Popular brands