Samsung SVR-1680 User Manual Download

Page: 16 / 97

User Manual

AUTO

Starts or stops user defined sequences.

PTZ

Starts or ends PTZ function.

MONITOR

SVR-3200/1680 : Cycles through from Monitor 1 to 4.

SVR-1660/1645/960/945 : Switches from main and sub

monitor

Navigates into the Menu.

13 SEARCH

Starts

mode.

COPY

Starts Copy mode.

FUNC

Starts Function mode.

ESC button

The Escape button navigates up the menu tree and

closes dialog windows.

PLAY/ENTER

Start playback or select an item on the menu.

◀

/REW

Navigates or selects in the menu, or for playback,

changes the reverse playback speed.

▶

/FFW

Navigates or selects in the menu, or for playback,

changes the forward playback speed.

▲

/PAUSE

Navigates or selects in the menu, or for playback,

pauses live or recorded video.

▼

/STOP

Navigates or selects in the menu, or for playback, stops

playback.

22 USB1,

USB2

USB ports for external devices (mouse, USB memory

stick).

Summary of Contents for SVR-1680


































































































Search results

Summary of Contents for SVR-1680

Reviews:

Related manuals for SVR-1680

Brands by name

Popular brands

Samsung SVR-1680, User Manual

Search results

Summary of Contents for SVR-1680

Reviews:

Related manuals for SVR-1680

Brands by name

Popular brands