Samsung SVR-1680 User Manual Download

Page: 53 / 97

User Manual

Monitor1 & Monitor2, Monitor3 & Monitor4 (SVR-3200/1680)

Monitor1 supports all functions supported by the DVR. Monitor2, 3 and 4 support all functions

except for playback and search.

Monitor1 & Monitor2 (SVR-1660/1645/960/945)

Monitor1 supports all functions supported by the DVR. Monitor2 supports Event Pop-up, User

Sequence and Screen Partition.

Switch to Event Screen (sec)

The screen containing an event trigger can be configured pop up automatically with this option.

The pop-up screen may be set to remain from 2 to 10 seconds or "Keep". If set to "Keep", the

pop-up screen will remain on the monitor for an indefinite time. To disable Keep mode, press

any channel button.

If Ch.1 pops up due to an event trigger and Ch.2 pops up as well before Ch.1 pop-up

expires, both channels will be displayed in a 4 partition screen mode. This will also

reset the hold timer of all pop-up screens.

Covert Channel

A channel can be concealed from live visual feed with the Covert Channel option. This menu will

display a list of all channels on the product. Select the desired channel by pressing [ENTER] or

left-clicking. Recordings from such selected channels will not be played in playback mode or

provide data in live visual feed mode.

Auto User Sequence

Auto user sequence can be configured to utilize 16 display modes and sequential interval of

Summary of Contents for SVR-1680


































































































Search results

Summary of Contents for SVR-1680

Reviews:

Related manuals for SVR-1680

Brands by name

Popular brands

Samsung SVR-1680, User Manual

Search results

Summary of Contents for SVR-1680

Reviews:

Related manuals for SVR-1680

Brands by name

Popular brands