Samsung SVR-1680 User Manual Download

Page: 36 / 97

User Manual

Since SVR-945 does not have a built-in DVD-R, please connect an external

backup device. Connect the device to a USB or eSATA port, enter the copy menu

and select the CD/DVD. A CD/DVD with a [Ext] tag will appear in the media list.

Select the device and proceed just as other devices.

Type

: Select the CD/DVD device using the up/down buttons on the front

side of the console or the mouse wheel.

Channel

: Select one or all 16 channels. Once the entry has been selected, use

the up/down buttons or the mouse wheel to adjust.

From

: Input the beginning date and time of the recording. Use the up/down

buttons on the front side of the console or the mouse wheel to

adjust.

: Input the ending date and time of the recording. Use the up/down

buttons on the front side of the console or the mouse wheel to

adjust.

Selecting Disk

: Select the medium to copy. Press [ENTER] on Select Disk to select

the medium.

Start

: Start copying. Press [ENTER] or left-click to start.

FAT32 Format

: Format USB disks and HDDs as FAT32.

This function does not apply to CDs or DVDs. To use formattable

media before usage, select FAT32 Format by pressing [ENTER] or

left-clicking the button.

Summary of Contents for SVR-1680


































































































Search results

Summary of Contents for SVR-1680

Reviews:

Related manuals for SVR-1680

Brands by name

Popular brands

Samsung SVR-1680, User Manual

Search results

Summary of Contents for SVR-1680

Reviews:

Related manuals for SVR-1680

Brands by name

Popular brands