Samsung SVR-1680 User Manual Download

Page: 11 / 97

User Manual

Chapter 2. Summary

2.1 Features

Monitoring Screen

The monitoring screen supports vivid, high-definition live visual feed from each channel and

provides multiple screens.

Real-time MPEG-4 visual output (480 frames)

Multiple split-screen monitoring modes

SVR-3200/1680/1660/1645: Single, 4, 9, 10, 16

SVR-960/945: Single, 4, 9

Automatic Screen Switching (AUTO)

Supports various monitor output modes

SVR-3200 : 4 Composite , 2 VGA

SVR-3200/1680 : 4 Composite, 1 VA

SVR-1660/1645/960/945 : 2 Composite, 1 VGA

Pan/Tilt, Digital Zoom, PIP (Picture-In-Picture)

The PIP function will be available with a firmware upgrade in the future.

This unit is a digital video recording and playback device to record image and video input

from 32/16/9 channels to its built-in hard disk. The buttons on the front of the unit as well

as the mouse and GUI allow easy setup and operation.

The Samsung SVR series of digital video recorders (DVRs) provide additional safety and

security to banks, apartment buildings and complexes, government offices as well as

other public, private and commercial facilities. Recorded high-quality video and images

are stored on hard disk for later retrieval or playback. Real time functionality delivers

users with the ability to simultaneously record multiple channels, playback video, and

copy video. A few of the more advanced user-conveniences include motion detection,

Pan/Tilt/Zoom controls (PTZ), password protection, real time audio recording, event lists,

and log files.

Summary of Contents for SVR-1680


































































































Search results

Summary of Contents for SVR-1680

Reviews:

Related manuals for SVR-1680

Brands by name

Popular brands

Samsung SVR-1680, User Manual

Search results

Summary of Contents for SVR-1680

Reviews:

Related manuals for SVR-1680

Brands by name

Popular brands