Samsung SVR-1680 User Manual Download

Page: 28 / 97

User Manual

1. If Switch to Event Screen is set to Off, the Event pop-up function will not

operate.

2. If Switch to Event Screen is set to Keep, the pop-up screen will be displayed

until a button press. To return to the previous screen, press any button.

4.6

Screen

Zoom

In single full-screen mode, press [FUNC] button, click

, click + and press Enter or left-

click to zoom in on the visual.

When

is clicked, the screen will zoom in on the center. The zoom area can move

from left to right in 18 steps and from up to bottom in 12 steps.

Use direction keys to move the zoom area.

To return to the previous screen, press Enter or left-click the background.

4.7

Pause

Live

screen

Both live visual feed and data playback can be paused momentarily.

Press [PAUSE] to pause visual feed. Press [PAUSE] button again to return to visual

feed.

4.8

PTZ Control

If a PTZ controller has been connected to the DVR and the necessary

protocols have been set in "Serial" menu, real-time manipulation of

PTZ becomes enabled.

To access PTZ functions, press [PTZ] button on the front side of the

console or press [FUNC] button to cycle through available functions.

The following PTZ controllers are supported:

PTZ, Keyboard Compatible List

모델명

제조사

SDZ160/330, Samsung SPD

Keyboard SCC3000, Samsung SRX-100B

SAMSUNG TECHWIN

BOSCH AutoDome, TC8560X-4

BOSCH

PELCO(P), PELCO(D)

PELCO

Summary of Contents for SVR-1680


































































































Search results

Summary of Contents for SVR-1680

Reviews:

Related manuals for SVR-1680

Brands by name

Popular brands

Samsung SVR-1680, User Manual

Search results

Summary of Contents for SVR-1680

Reviews:

Related manuals for SVR-1680

Brands by name

Popular brands