User Manual
65
Sync with NTP
The NTP function may be set to "On" or "Off".
NTP Mode
The DVR's NTP mode may be set to Client, Server or Both.
NTP Server Loc.
If the NTP Mode is set to "Client", NTP Server Location will be set to "Enable". It determines the
presences of the NTP server within the local or public network.
NTP Local Server IP
If the NTP Service Location is set to "Local", NTP Local Server IP will be set to "Enable". It
determines the IP of the NTP server. In a local network, the IP of the NTP server or the DVR
acting as the server is used.
Interval (min)
Sets the interval period between synchronization.
If NTP Mode is set to “Client”, Sync with NTP must be set to “On”.
6.9.9 Serial
The DVR may use up to 4 serial ports total. 2 are RS-232C; the other 2 are RS-485
.
Summary of Contents for SVR-1680
